Cryogenic


Type 0255 - Direct-acting 2/2 way plunger valve


The direct-acting plunger solenoid valve Type 0255 is also suitable for high pressures and high temperatures.

  • Push-over solenoid system
  • Compact design, up to DN 6
  • Housing made of brass or stainless steel with threaded connection

 

Type 2610 - Plunger valve 2/2 way direct-acting


The direct-acting valve Type 2610 is delivered with circuit function normally closed. The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature. In this way condensation or an unacceptable heating up of the coil is avoided. The supplied cable head contains a "kick and drop" electronic that supports the opening phase and afterwards reduction of the opening holding power.

  • Direct-acting, media separated valve with diameter of up to DN 12
  • Welded metal bellows system (316Ti)
  • High-quality PTFE seat seal
  • Media temperature from -200 °C to +180 °C
  • Energy-saving 'Kick and Drop' electronics

Type 6012 - Plunger valve 3/2 way direct-acting


Valve 6012 is a direct-acting plunger valve. The stopper and plunger guide tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. A Bürkert-specific flange design (SFB) enables space-saving arrangement of valves on a manifold. Push-in fittings can be selected for flexible hose connection. A banjo connection with banjo bolt is the ideal solution for easy direct mounting on a pneumatic drive. Optional manual actuation enables quick commissioning and optimal maintenance. In combination with a plug in accordance with DIN EN 17301-803 Form B or C, the valves satisfy protection class IP65.

  • Direct-acting, compact small-format valve with diameter of up to DN 1.6
  • Screwed coil system
  • Banjo threaded connection for direct mounting on pneumatic valves
  • Simple and quick push-in, flange, or manifold installation
  • Service-friendly manual override

Type 6026 - Plunger valve 2/2 way direct-acting


The direct-acting valve Type 6026 is direct-acting media-separated plunger valve. The thermal isolation of the coil and housing by means of stainless steel bellows allows the extreme medium temperature. In this way condensation or an unacceptable heating up of the coil is avoided. The coils are moulded with chemically resistant epoxy. Thanks to the use of highly resistant housing and sealing materials such as the stainless steel PTFE the valve is suitable for critical chemical applications. To reduce power consumption in operation, coils with "Kick and Drop" (KD) electronics (double coil technology) are available. In combination with a plug acc. to DIN EN 175301-803 Form A, the valve satisfies IP65 degree of protection.

  • Media separated plunger valve up to DN12
  • Suitable for high and low temperatures (-200 °C...180 °C)
  • Energy-saving double coil technology with kick and drop design

Other


Type 0255 - Direct-acting 2/2 way plunger valve

Type 0255 - Direct-acting 2/2 way plunger valve


อ่านต่อ

Type 2610 - Plunger valve 2/2 way direct-acting

Type 2610 - Plunger valve 2/2 way direct-acting


อ่านต่อ

Type 6012 - Plunger valve 3/2 way direct-acting

Type 6012 - Plunger valve 3/2 way direct-acting


อ่านต่อ

Type 6026 - Plunger valve 2/2 way direct-acting

Type 6026 - Plunger valve 2/2 way direct-acting


อ่านต่อ