Water Solenoids


Type 0290 - Servo-assisted 2/2 way diaphragm valve


The 0290 valve is a servo-assisted solenoid valve of the S.EV series. The valve opens without differential pressure. The opening process is supported by the fixed coupling of the diaphragm to the plunger. In the process, the integrated 'soft-kick' function opens in a manner that is gentle on the material. Various diaphragm material combinations are available depending on the application. The range of housings is rounded off by stainless steel and cast iron versions. The solenoid coils are encapsulated with a chemically resistant epoxy. 'Kick and drop' electronics are moulded into all DC versions for reduced electrical power consumption. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 and when in combination with a stainless steel or plastic housing then NEMA 4X.

  • Servo-assisted diaphragm valve with diameter of up to DN50
  • Hard-coupled diaphragm opens without differential pressure
  • Vibration-proof, block screwed coil system
  • Damped design for quiet closing
  • Energy-saving power reduction in all DC versions

Type 5282 - Servo-assisted 2/2-way diaphragm valve


The 5282 valve is a servo-assisted diaphragm valve. A minimum differential pressure is required for the valve to function. Various diaphragm material combinations and circuit functions are available depending on the application. The standard brass body satisfies all European drinking water requirements. The body offering is completed with stainless steel and grey cast iron versions. The 3/2-way pilot valve can be easily converted from NC to NO circuit function by rotating it on the armature. The solenoid coils are moulded with a chemically resistant epoxy. The 5282 is equipped with manual override for start-up and testing. In combination with a plug acc. to DIN EN 175301-803 Form A and stainless steel body, the valves satisfy the requirements of NEMA 4X.

  • Servo-assisted diaphragm valve up to DN65 orifice
  • Separating diaphragm for aggressive and contaminated media
  • Closing and opening times can be adjusted individually
  • Explosion-proof versions (Cat.2)
  • Service-friendly manual override

Type 6213 - Servo-assisted 2/2 way diaphragm valve


The 6213 EV valve is a servo-assisted solenoid valve of the S.EV series. The spring coupling of the diaphragm supports the opening process of the valve. In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for complete opening. A special version (HP00) which opens the valve without differential pressure is available for gas and vacuum applications. Various diaphragm material combinations are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded off with a stainless steel version. For reduced energy requirement, all coils can be delivered with electronic power reduction. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X.

  • Servo-assisted diaphragm with diameter of up to DN40
  • Spring coupled diaphragm opens without differential pressure
  • Vibration-proof, screwed coil system
  • Damped design for quiet closing
  • Compact construction with high flow rate

Type 6281 - Servo-assisted 2/2 way diaphragm valve


The 6281 valve is a servo-assisted solenoid valve of the S.EV series. A minimum differential pressure is always required for the function of the valve. Various diaphragm material combinations and methods of operation are available depending on the application. The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded out by a stainless steel version. For reduced energy requirement, all coils can be delivered with electronic power reduction. The valve can be equipped with manual override for easy maintenance and commissioning. In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X.

  • Servo-assisted diaphragm with diameter of up to DN50
  • Vibration-proof, central screwed coil system
  • Damped design for quiet closing
  • Service-friendly manual override
  • Explosion-proof versions

Other


Type 0290 - Servo-assisted 2/2 way diaphragm valve

Type 0290 - Servo-assisted 2/2 way diaphragm valve


อ่านต่อ

Type 5282 - Servo-assisted 2/2-way diaphragm valve

Type 5282 - Servo-assisted 2/2-way diaphragm valve


อ่านต่อ

Type 6213 - Servo-assisted 2/2 way diaphragm valve

Type 6213 - Servo-assisted 2/2 way diaphragm valve


อ่านต่อ

Type 6281 - Servo-assisted 2/2 way diaphragm valve

Type 6281 - Servo-assisted 2/2 way diaphragm valve


อ่านต่อ