Micro Fludics and Pumps


Type 6724 - 2/2 or 3/2-way Whisper Valve with media separation


Many fluidic processes moving closer to where they are actually required. In the field of medical devices, for example, treatments such as dialysis can be provided to patients in convenient surroundings at home. Washing units in analytical equipment are positioned on the pipetting arm or directly on the print head in printing applications. This imposes different requirements on the components used. Solenoid valves must be able to switch without being heard. They need to be smaller and lighter to be used in mobile devices. However, their ability to achieve a long service life and excellent switching characteristics is every bit as important. The Whisper Valve Type 6724 combines all of these traits and, thanks to its modular structure and range of available material variants, this valve is universally applicable.

  • Highest chemical resistance
  • Compact design with 8.9 mm installation width
  • DN 0.8 mm (vacuum up to 5 bar) and 1.2 mm (vacuum up to 3 bar)
  • Very fast, almost silent switching with < 20 dB (A) and very low power consumption
  • High back-pressure tightness, excellent cleanability and 100% duty cycle

Type 6164 - 3/2 way pneumatic cartridge solenoid valve


Customer specific applications are becoming more complex. Size, fluidic performance, low power consumption and cost efficiency are critical criteria. Therefore the demands on the components used are increasing. Type 6164 was developed with the goal, to simplify pneumatic control with optimum integration of a pilot valve in block and plastic moulding parts. Thus, making a more compact design possible. This valve sets new standards with its uncompromising reliability, above average life cycle span and excellent fluidic characteristics. Various certifications and conformities make the use of the valve in medical applications such as media multiplexers in dental technology and oxygen control in respirators possible.

  • Compact design with 11 mm width per station
  • Orifices from 0,5 mm (9 bar) to 1,2 mm (1,5 bar)
  • High durability and reliability
  • Low power consumption, as well as optional ATEX Ex ib version
  • Design for optimum integration

Type 6712 - 2/2-way Whisper Valve with media separation


Fluidic “point-of-care” applications, such as dialysis or artificial respiration, and “point-of-use” applications, such as at pipetting arms in biological analysis, present special requirements. The new, media-separated Whisper Valve Type 6712 was developed for precisely these applications. It sets new benchmarks particularly with low switching noise and excellent cleanability. However, the Type 6712 is also the first choice in industrial applications, such as inkjet printers, thanks to its long service life and excellent switching dynamics. The valve’s modular design and available material variants means that it can be used with practically all liquids and gases in the fields of life sciences and industrial applications. This is a valve that combines dosing accuracy and cleanability.

  • Highest chemical resistance combined with minimum internal volume
  • Compact design with 7 mm installation width
  • DN 0.8 mm (3 bar) and 0.4 mm (5 bar)
  • Switching noise < 36 dB
  • For dosing applications with excellent cleanability

Type 6628 - 2/2 or 3/2 way TwinPower Rocker-Solenoid Valve with separating diaphragm


Direct acting medium separated 2/2 and 3/2 way Rocker Solenoid Valve for control of aggressive fluids and gases in analytical medical applications, the food industry, and also the chemical industry for dosing, filling, mixing and distribution. The medium is in contact with fluid housing and seal material solely through the isolating diaphragm. This valve with the new TwinPoweractuator, robust screw-in connection and 22 mm installation width, will fulfil the highest requirements. The established rocker solenoid technology is characterized through full back pressure tightness, good rinsing capability and low internal volume. Type 6628 is available in different technical versions and by virtue of several body options, it offers a perfect adaption in fluid applications.

  • 22 mm ultra compact design with orifices up to DN 3.0
  • Isolating diaphragm for high chemical resistance
  • Circuit function NC, NO and 3 way universal
  • Back pressure tightness via rocker principle
  • Minimal internal volume with excellent cleanability

Type 6626 - 2/2-way and 3/2-way Bürkert TwinPower rocker solenoid valve with separating diaphragm


From the fluidics perspective, Type 6626 combines the reliable and successful rocker principle. Due to the new Bürkert TwinPower concept, this actuator enables drastic reduction of installation space while maintaining performance output. Hence, the 16 mm wide medium separated rocker valve, with 3.0 mm DN and a pressure resistance of 2 bar, provides the same performance as a traditional 22 mm valve. In addition, the integrated power reduction decreases energy consumption by 75%. In combination with other design features, the heat transfer into the medium can be reduced to a minimum. With regard to the design, special attention has been placed on excellent cleanability and high reliability. By using high quality materials, Type 6626 is also ideal for handling aggressive medium. The valve is available as a 2/2-way and 3/2-way version.

  • For highest chemical resistance requirements
  • Ultra compact design due to Bürkert TwinPower actuator with 16 mm width/station
  • DN 2.0 (3 bar) and DN 3.0 (2 bar)
  • Integrated hit-and-hold electronics assembly
  • High back-pressure tightness with excellent cleanability

Type 6624 - 2/2 and 3/2 way Burkert TwinPower Rocker-Solenoid Valve with separating diaphragm


Type 6624 combines the reliable and successful Rocker principle with a highly innovative new actuator. The Burkert TwinPower concept of this actuator reduces the size greatly without loss in performance. Hence the 10 mm wide medium isolated rocker valve, 6624, with a 1.6 mm orifice and a pressure resistance of 2 bar, provides the same performance as a traditional 16 mm valve. In addition, the integrated power reduction decreases the energy consumption by 75%. In combination with other design features the heat transfer into the medium can be reduced to a minimum. In the design of the 6624, the main benefits lie in its excellent cleanability and a high reliability. By using high performance materials the 6624 suits the handling of aggressive medium perfectly. The valve is available in a 2-way and 3-way version.

  • For highest chemical resistance requirements
  • Ultra compact design due to Burkert Twinpower-actuatur with 10.3 mm width
  • DN 0.8 (5 bar) and DN 1.6 (2 bar)
  • Integrated hit and hold electronic
  • High back pressure tightness with excellent cleanability

Type 6650 - 2/2 or 3/2 way Flipper-Solenoid Valve with separating diaphragm


With a width of only 4.5mm, Type 6650 sets a new standard in medium isolation miniature solenoid valves. The optimized design enables reproducible and precise dosing, good rinsing capability and is suitable for the application of aggressive chemicals owing to the high quality of the materials used. With the two nominal sizes of 0.4 and 0.8mm, as well as the selection between 2/2-way and 3/2-way function, it is ideal for applications where the highest fluid performances are required in the smallest space. Type 6650 opens up new possibilities, owing to the 4.5mm station width, in particular in connection with dosing in 384-well microtiterplates. Based on the well-known flipper principle (Type 0330) it is tied to the success history of the legendary Type 127.

  • Only 4.5mm wide
  • Medium isolation, for aggressive fluids
  • Direct-acting
  • Vacuum up to 7 bar
  • Short response times

Type 6144 - 3/2 way Flipper Solenoid Valve, direct acting


Type 6144 is a direct-action 3/2-way solenoid valve designed for neutral gases and liquids. Through the movement between the 2 end positions, the switching element (flipper) seals one of the two opposing valve seats and connects the other to the working port. This movement is caused by the solenoids magnetic field pushing a permanent magnet that is fixed to the flipper element. In addition to its exceptional performance characteristics, the flipper principle is especially marked by its very low switching noise and its low wear level. Further more, integrated medium separation enables use above and beyond pneumatic applications. Depending on the case of operation, various flange connections are available that are suitable for both individual and block mounting. Installation advice: The valve must have a minimum distance of 5 mm from other ferromagnetic materials in order to avoid malfunctioning during operating conditions.

  • Direct-acting
  • 0 to 10 bar
  • Low power consumption
  • Sub-base connection
  • 10mm width per station

Type 6606 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm


The direct-acting rocker solenoid valves with isolating diaphragm of Type 6606 (2/2- and 3/2–way) are high quality valves for analytical technology. They have minimal dead volume and internal volume with few crevices making them easy to flush out. The fluid only comes into contact with the body material and the FFKM seal. The heat transfer to the medium is minimal. The fluid path is isolated from the coil by a stainless steel plate. The valves are ideal for dosing, filling, mixing and distributing of small quantities of fluid for medical, analytical and laboratory applications.

  • For maximum chemical resistance requirements
  • Compact design with 16 mm width and Cv ratings up to 0.058
  • Flexible design for custom manifold assemblies
  • High back pressure tightness, excellent cleanability and 100 % duty cycle
  • Normally closed, normally open and universal function

Type 6126 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm


The direct-acting rocker solenoid valve, Type 6126, is suitable for general applications in which compressed air, gases or slightly contaminated liquids are to be switched. The medium is in contact exclusively with the housing material and the FKM seals. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate. The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.

  • With isolating diaphragm
  • Compact design with 16 mm width and Cv ratings up to 0.058
  • Flexible design for custom manifold assemblies
  • High back pressure tightness, excellent cleanability and 100 % duty cycle
  • Normally closed, normally open and universal function

Type 6106 - 2/2 or 3/2 way Pneumatic-Rocker-Solenoid Valve


The direct-acting rocker solenoid valve type 6106 is designed for use on neutral gaseous mediums. The heat input in the medium is minimal, because the housing is separated from the coil by a stainless steel plate. The valves can be mounted directly or also single or manifold mounted. They are used for dosing, filling, mixing and distributing small quantities of medium.

  • Compact design with 16mm width
  • DN 0,9 and DN 1,2 (10 bar)
  • High lifecycle
  • Low power consumption, ATEX Ex ia on request
  • For pneumatic applications

Type 0127 - Direct-acting 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm


Burkert’s unique miniature rocker solenoid valve is the pioneer of isolated mini valves suitable for laboratory, medical and analysis technology, that still set the standard! It is a highly reliable minimum volume valve that has low dead volume and is easy to purge. Boasting aninert isolating diaphragm between the actuator and body, it is operated via a rocker that separates the actuator from the fluid. Heattransfer between the actuator and the fluid is minimized due to the coil not having direct contact with the diaphragm. The valves can be manifold mounted and a simplified common wiring system is available if required. Special dead volume free designs are also obtainable on request.

  • For maximum chemical resistance requirements
  • Compact design with 16 mm width and Cv ratings up to 0.058
  • Proven reliability since 1993
  • Flexible design for custom manifold assemblies
  • High back pressure tightness, excellent cleanability and 100 % duty cycle

Type 0117 - 2/2 way Plunger-Solenoid Valve with separating diaphragm


Type 117 is a normally-closed direct-actingplunger-type solenoid valve with PTFE-coated diaphragm. The diaphragm isolates the fluidfrom the solenoid system. When deenergized (in circuit function A)the valve is closed by spring action. When energized, the solenoid armature is drawn in 2/2 way, G 1/8, UNF 1/4-28 FluidControl Systems against a spring to open the valve. The solenoid epoxy encapsulation efficiently dissipates the heat generated by the coil.

  • Compact design
  • Low electrical power consumption
  • Short response times
  • Hermetically sealing isolating diaphragm
  • Non-metallic valve internals

Type 0375 - 2/2 or 3/2-way pneumatic rocker valve


The direct-acting rocker solenoid valves Type 375 are designed, in particular, for use with neutral gaseous media. The valves can be directly, individually or manifold mounted. They are used for dosing, filling, mixing and distributing tasks.

  • Compact design measuring 16 mm in width
  • High service life
  • Low power consumption
  • For pneumatic applications

Type 7615 - Micro Dosing Unit for precise dosing in microlitre-range


Bürkert’s Micro Dosing Unit has been designed for precise dosing applications in the microliter range. It combines high dosing accuracy and precision with excellent chemical inertness. The unit is comprised of three valves which can be opened simultaneously for flushing. Active inlet and outlet valves enable the device to pump liquid in two directions. This feature can be used to mix fluids inside a tube or channel or to constantly keep them in motion. Reagents can be sucked back from the dispensing tip to prevent drying out after dosing. The integrated heating function heats up the valves and the medium, and the unit comes with dry running capabilities.

  • Diaphragm pump for high chemical resistance
  • Dosing volume 5 µl/stroke up to 8 ml/min. in both directions
  • Dosing accuracy < +/- 3,5 %
  • Self priming
  • Integrated electronics, easy to use

Type 7604 - Micro diaphragm pump for continuous pumping


The Burkert series 7604 is a unique, selfpriming, adjustable, diaphragm pump with a long service life and quiet operation that is ideally qualified for aggressive media. The pump is perfectly suited for continuous liquid low flow applications. Variations in flow rate are achieved by simply varying the frequency input. With a maximum frequency input of about 40 Hz, the fluid flows virtually pulsation free. Perfluorelastomer seals and a PEEK body are the only wetted parts, allowing the pump to be used for a wide range of aggressive fluids, organic and inorganic solvents and other difficult to handle media. The compact design (only 11 mm wide) allows for ease of mounting with standard bodies designed for surface mount (manifold) or tube connections. The low power consumption allows the device to be easily incorporated into mobile devices, and virtually eliminates any heat transfer passed from the actuator to the fluid. „Manufactured by Burkert“ ensures the user the same high quality products and proven reliability they have depended on in today’s innovative market.

  • self-priming
  • nearly pulsation free
  • for continuous pump applications
  • diaphragm pump

Other


Type 6724 - 2/2 or 3/2-way Whisper Valve with media separation

Type 6724 - 2/2 or 3/2-way Whisper Valve with media separation


อ่านต่อ

Type 6164 - 3/2 way pneumatic cartridge solenoid valve

Type 6164 - 3/2 way pneumatic cartridge solenoid valve


อ่านต่อ

Type 6712 - 2/2-way Whisper Valve with media separation

Type 6712 - 2/2-way Whisper Valve with media separation


อ่านต่อ

Type 6628 - 2/2 or 3/2 way TwinPower Rocker-Solenoid Valve with separating diaphragm

Type 6628 - 2/2 or 3/2 way TwinPower Rocker-Solenoid Valve with separating diaphragm


อ่านต่อ

Type 6626 - 2/2-way and 3/2-way Bürkert TwinPower rocker solenoid valve with separating diaphragm

Type 6626 - 2/2-way and 3/2-way Bürkert TwinPower rocker solenoid valve with separating diaphragm


อ่านต่อ

Type 6624 - 2/2 and 3/2 way Burkert TwinPower Rocker-Solenoid Valve with separating diaphragm

Type 6624 - 2/2 and 3/2 way Burkert TwinPower Rocker-Solenoid Valve with separating diaphragm


อ่านต่อ

Type 6650 - 2/2 or 3/2 way Flipper-Solenoid Valve with separating diaphragm

Type 6650 - 2/2 or 3/2 way Flipper-Solenoid Valve with separating diaphragm


อ่านต่อ

Type 6144 - 3/2 way Flipper Solenoid Valve, direct acting

Type 6144 - 3/2 way Flipper Solenoid Valve, direct acting


อ่านต่อ

Type 6606 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

Type 6606 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm


อ่านต่อ

Type 6126 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

Type 6126 - 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm


อ่านต่อ

Type 6106 - 2/2 or 3/2 way Pneumatic-Rocker-Solenoid Valve

Type 6106 - 2/2 or 3/2 way Pneumatic-Rocker-Solenoid Valve


อ่านต่อ

Type 0127 - Direct-acting 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm

Type 0127 - Direct-acting 2/2 or 3/2 way Rocker-Solenoid Valve with separating diaphragm


อ่านต่อ

Type 0117 - 2/2 way Plunger-Solenoid Valve with separating diaphragm

Type 0117 - 2/2 way Plunger-Solenoid Valve with separating diaphragm


อ่านต่อ

Type 0375 - 2/2 or 3/2-way pneumatic rocker valve

Type 0375 - 2/2 or 3/2-way pneumatic rocker valve


อ่านต่อ

Type 7615 - Micro Dosing Unit for precise dosing in microlitre-range

Type 7615 - Micro Dosing Unit for precise dosing in microlitre-range


อ่านต่อ

Type 7604 - Micro diaphragm pump for continuous pumping

Type 7604 - Micro diaphragm pump for continuous pumping


อ่านต่อ