individual 5-way


Type 0450 - 3/2 or 5/2 way Spool Valve


The multi-way valve type 0450 Ex brings Burkert’s 0450 centralized process actuation solution to hazardous areas. Its high flow rates in combination with the aluminum bodies allow a wide range of applications. Most commonly used safety barriers are approved for applications with the 0450 EExi. For easy installation, the valves can (on request) be supplied pre-wired to WAGO and Harting junction boxes.

  • EEx ia IIC T6 approved
  • Optimized System Solutions for hazardous areas
  • High Flow Rates
  • Long service life even with non-lube conditions
  • Pre-tested and supplied easy to connect
Applications :  
  • Chemical Industry
  • Pharmaceutical Processing Equipment
  • Cosmetic Processing Equipment
  • Water Treatment / Processing Equipment

Type 0460 - 5/2-way pulse or 5/3-way solenoid valve for pneumatic applications


The pilot valve Type 0460 consists of a pilot control solenoid valve with double coil and pneumatic slide valve. The principle allows the switching of high pressures together with low power consumption and fast switching times. All valves are equipped with a manual override as a standard.

  • 11 mm width/station
  • Compact design
  • Block assembly
  • Fast switching times

Type 0461 - 5/2-way pulse and 5/3-way solenoid valve for pneumatic applications


The pilot valve Type 0461 consists of a pilot control solenoid valve with double coil and pneumatic slide valve. The principle allows the switching of high pressures together with low power consumption and fast switching times. All valves are equipped with a manual override as a standard.

  • 16.5 mm width/station
  • Compact design
  • Block assembly
  • Fast switching times

Type 6511 - 5/2 way Solenoid Valve for pneumatics


Type 6511 consists of the pilot flipper solenoid valve Type 6144 and a pneumatic seat valve. the Flipper principle allows switching of high pressures with low power consumption and with short switching times. All valves are equipped with manual override as a standard. Type 6511 is extendable and preferably with a cable plug at the back of the valve island, Type 8640, and with the plug connection at the front of the valve block in the pneumatic control actuators.

  • Compact design
  • Single and manifold mounting
  • Low power consumption
  • Fast response times

Type 6517 - 5/2 way Solenoid Valve for pneumatics


The 6516/6517 EExi valves are used for process actuation in hazardous areas. Thanks to the intrinsically safe design and the possibility of block mounting, the valves can be used in a wide variety of demanding applications.

  • II2G EEx ia IIC T6 approved PTB 01 ATEX 2175
  • FM IS / I, II, III /1/ ABCDEFG approved
  • High flow rates
  • Long service life

Type 6519 - Servo-assisted 5/2, 5/3 or 3/2 way Solenoid Valve for pneumatics


The Type 6518 is a servo-assisted 3/2-way valve and the Type 6519 is a 5/2 or 5/3-way valve. Together, they form a product line. The valves can be used individually or in blocks. The valves work without a continuous air consumption and are used for the pneumatic control of double or single-acting actuators. A solenoid valve Type 6014 is used as a pilot. The use of high quality materials makes it possible to use these valves in the open air and under chemical atmospheres. The product line contains units with Ex-Approvals and NAMUR flange interface.

  • High flow-rate capacity
  • Reduced power consumption
  • Single or manifold mounting
  • Standard-, Ex mb and Ex ia versions
  • Threaded port G 1/4” or NAMUR flange

Type 6525 - 5/2 way Solenoid Valve for pneumatics


Type 6525 consists of a pilot flipper solenoid valve type 6144 and a pneumatic seat valve. The flipper action system enables the switching of high pressures with low power consumption and short switching times. All valves are equipped with manual emergency actuation as standard.

  • Compact design
  • Single and manifold mounting
  • Low power consumption
  • Fast response times
  • Second connection shut-off function

Type 6527 - 5/2 way Solenoid Valve for pneumatics


The solenoid valve Type 6527 consists of a pneumatic valve body fitted with Type 6106 rocker pilot valve. The rocker principle allows switching of high pressures together with low power consumption and fast response times. The extendable Type 6527 can be used for block modules (tag connectors in front) or for entire valve islands (8640 & 8644 - tag connectors at the block). All valves are equipped with manual override as a standard.

  • Compact design
  • Single and manifold mounting
  • Low power consumption
  • Rocker pilot in DC
  • Fast response times

Other


Type 0450 - 3/2 or 5/2 way Spool Valve

Type 0450 - 3/2 or 5/2 way Spool Valve


อ่านต่อ

Type 0460 - 5/2-way pulse or 5/3-way solenoid valve for pneumatic applications

Type 0460 - 5/2-way pulse or 5/3-way solenoid valve for pneumatic applications


อ่านต่อ

Type 0461 - 5/2-way pulse and 5/3-way solenoid valve for pneumatic applications

Type 0461 - 5/2-way pulse and 5/3-way solenoid valve for pneumatic applications


อ่านต่อ

Type 6511 - 5/2 way Solenoid Valve for pneumatics

Type 6511 - 5/2 way Solenoid Valve for pneumatics


อ่านต่อ

Type 6517 - 5/2 way Solenoid Valve for pneumatics

Type 6517 - 5/2 way Solenoid Valve for pneumatics


อ่านต่อ

Type 6519 - Servo-assisted 5/2, 5/3 or 3/2 way Solenoid Valve for pneumatics

Type 6519 - Servo-assisted 5/2, 5/3 or 3/2 way Solenoid Valve for pneumatics


อ่านต่อ

Type 6525 - 5/2 way Solenoid Valve for pneumatics

Type 6525 - 5/2 way Solenoid Valve for pneumatics


อ่านต่อ

Type 6527 - 5/2 way Solenoid Valve for pneumatics

Type 6527 - 5/2 way Solenoid Valve for pneumatics


อ่านต่อ