Positioner & PID control


Type 8798 - Remote sensor for pneumatically actuated process valves


The remote sensor Type 8798 is a digital non-contact position sensor for use on pneumatically actuated modulating actuators. This Remote Sensor is available in two versions; as linear and as rotative position sensor and is used in combination with the Positioner Type 8791/8792 and Process Controller Type 8793 (remote version). The linear Remote Sensor can be combined with our process valves ELEMENT Typ 210x/230X and CLASSIC Type 27xx Series. Whereas the rotative Remote Sensor can be mounted on linear actuators in accordance with NAMUR recommendation (DIN IEC 534-6) or rotary actuators in accordance with VDI/VDE 3845.

  • Digital signal transmission to remote positioner / prosess Controller
  • Variable cable length
  • Mounting acc. to NAMUR/IEC534-6 or VDI/VDE 3845 (rotative Sensor)
  • Integrated mounting on piston actuators (linear Sensor)
  • With ATEX II cat. 3G/D approval (linear Sensor)

Type 8694 - Digital electropneumatic positioner for the integrated mounting on process control valves Top Control


Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4 - 20 mA signal or through AS-Interface. A contact-free analogue position sensor measures the position of the valve spindle. Simple installation through automatic TUNE-function and setting through DIP-switch: Close tight function Characteristic curves selection Reversal of effective direction Switching manual /automatic operation Binary input Additional parametrisation options are possible through DTM devices. A software interface can be used for, amongst others, linearisation of the operation characteristics by using free programmable fixed points. The valve position indication is shown through LED components. As an option an analogue position feedback can be integrated.

  • Compact, robust stainless Steel design
  • Start-up by automatic TUNE-function
  • Contact-free position sensor
  • Integrated control air routing
  • AS-Interface, IO-Link or Bürkert System bus (büS)

Type 8692 - Digital electropneumatic Positioner for the integrated mounting on process control valves Top Control


The compact positioner Type 8692 is optimized for integrated mounting on the pneumatic actuators in the process valve series Type 23xx/2103 and is specially designed for the requirements of a hygienic process environment. The control air channel is integrated in the actuator without external tubings. The easy handling and the selection of additional software functions are done either on a big graphic display with backlight and keypad or over COMMUNICATOR. The positioner registers the valve position without deterioration through a contact-free, analog position sensor. The control of single or double-acting actuators is done without internal air consumption. With integrated diagnostic functions operation conditions of the control valve can be monitored. Through status signals, valve diagnostic messages are transmitted according to NAMUR NE107 and recorded as history entries. The housing is easy to clean and features proven IP protection and chemically resistant materials for use in hygienic processing, in food, beverage and pharmaceutical industries. Combined with Bürkert ELEMENT actuators the unique pilot valve system enables a compressed air recycling that avoids actuator chambers contamination from the environment.

  • Compact, robust stainless Steel design
  • Easy start-up by automatic X-Tune function
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)

Type 8696 - Digital electropneumatic positioner for the integrated mounting on process control valves Top control


Compact positioner for integrated mounting on pneumatically operated process valves. Remote setpoint adjustment via a 4-20 mA signal. A contact-free continuous sensor measures the position of the valve spindle. Simple installation through automatic tune function and setting through DIP-switch: Close tight function, Characteristic curves selection, Reversal of effective direction, Switching manual /automatic operation, Binary input. A software interface can be used for, amongst others, linearisation of the operation characteristics by using free programmable fixed points. The valve position indication is shown through LED components. As an option an analogue position feedback can be integrated.

  • Compact, robust stainless Steel design
  • Start-up by automatic Tune function
  • Contact-free position sensor
  • Integrated control air routing
  • Analoge Feedback (option)

Type 8791 - Digital electropneumatic Positioner SideControl


The robust and compact positioner is designed to a standardisation acc. to IEC 65034-6-1 or VDI/VDE 3845 (IEC 60534-6-2) for assembly with linear and rotary actuators. In addition, the remote version with the displacement position sensor can be combined with Bürkert process control valves The setpoint setting for the electro-pneumatic digital Positioner SideControl BASIC occurs using a standard signal 4…20mA or by bus as an option. In addition there is a binary input and an optional analogue feedback available. The valve opening is signalled by a mechanical indicator element and the device status is shown on three coloured LEDs. All the operational elements are found in the housing . The start-up happens automatically, and directly at the device the following functions can be activated through DIP switches: - Close tight function - Inversion of the operating direction of the setpoint signal - Characteristic curves selection - Switching between manual and automatic mode. Additional possibilities on configuration and parameter setting, for example, linearisation of the operation characteristics by using communications software which allows customised programming. The pilot valve system can be used equally for single and double-acting drives. It is characterised by a defined safety feature in case of failure of the electrical or pneumatic power supply and possesses an enormous air capacity range with pressure supply up to 7 bar.

  • Compact and robust design
  • Easy to start using Tune function
  • Integrated diagnostic functions for valve monitoring
  • Dynamic positioning system with no air consumption in controlled state
  • AS-Interface, IO-Link or Bürkert system bus (büS)

Type 8792 - Digital electropneumatic Positioner SideControl


The robust and compact positioner is designed to standardisation acc. to IEC 60534-6-1 or VDI/VDE 3845 (IEC 60534-6-2) for assembly with linear and rotary actuators. In addition, the remote version with the displacement position sensor can be combined with Bürkert process control valves. The digital electropneumatic positioner SideControl can be operated with the usual current and voltage standard signals and can also be equipped with the fieldbus interface. The Positioner is equipped with additional diagnostic functions to monitor the state of the valve. Through status signals, valve diagnostic messages are transmitted according to NAMUR NE 107 recommendations and recorded as history. With the diagnosis, the operating conditions of the control valve can be monitored. This allows planned maintenance and optimises plant availability. Operation occurs via the external operation and display module with a backlit graphical display. The user operation is very simple and clear, identical to the Bürkert positioner or process controller TopControl, Type 8692/8693. The pilot valve system can be used equally for single and double-acting actuators. It is characterised by a defined safety feature in case of failure of the electrical or pneumatic power supply and possesses an enormous air capacity range with pressure supply up to 7 bar.

  • Compact and robust design
  • Easy to start using Tune function
  • Integrated diagnostic functions for valve monitoring
  • Dynamic positioning system with no air consumption in controlled state
  • EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1, DeviceNet or Bürkert system bus (büS)

Type 8693 - Digital electropneumatic process controller for the integrated mounting on process control valves Top Control


The compact process controller Type 8693 is optimized for integrated mounting on the pneumatic actuators in the process valve series Type 23xx/2103 and is specially designed for the requirements of a hygienic process environment. The actual value of the process factor is directly supplied to the device as 4-20 mA, PT100 or a frequency signal. The process controller calculates the setpoint for the subordinated positioner through the variance comparison. Due to the analogue feedback all analogue values on the controlling level can be transferred. With integrated diagnostic functions operation conditions of the control valve can be monitored. Through status signals, valve diagnostic messages are transmitted according to NAMUR NE107 and recorded as history entries. The parameterization of process controller and positioner can be carried out automatically.The easy handling and the selection of additional software functions are done either on a big graphic display with backlight and keypad or over COMMUNICATOR. The positioner registers the valve position without deterioration through a contact-free, analog position sensor. The control of single or double-acting actuators is done without internal air consumption. Communication interfaces such as PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP, büS (based on CANopen) and analogue as well as binary feedback can also be chosen.

  • Compact, robust stainless Steel design
  • Easy start-up by Tune function for position and process controller
  • Contact-free position sensor
  • Integrated control air routing with spring chamber aeration
  • PROFIBUS DP-V1, DeviceNet, EtherNet/IP, PROFINET, Modbus TCP or büS (Bürkert System Bus)

Type 8793 - Digital electropneumatic Process Controller SideControl


The digital process controller Type 8793 is designed to standardization acc. to IEC 60534-6-1 or VDI/VDE 3845 (IEC 60534-6-2) for assembly with linear and rotary actuators. In addition, the remote version can be combined with Bürkert process control valves. The process controller can be operated by the usual current and voltage standard signals and can also be equipped with the fieldbus interface. The actual process value is directly supplied to the device as 4-20 mA, PT100 or as frequency signal. The process controller calculates the position setpoint for the subordinated positioner through variance comparison. The parameterization of process controller can be carried out automatically via Tune function. The handling is easily done either on a graphic display with keypad or via Bürkert Communicator. The process controller is equipped with diagnostic functions to monitor the state of the valve. With the diagnostics, the operating conditions of the control valve can be monitored. This allows planned maintenance and optimizes plant availability. The pilot valve system can be used equally for single and double acting actuators. It is characterized by a defined safety feature in case of failure of the electrical or pneumatic power and possesses an enormous air capacity range with pressure supply up to 7 bar.

  • Compact and robust design
  • Easy Start-up using TUNE-Function of the Positioner and Process controller
  • Integrated diagnostic functions for valve monitoring
  • Dynamic positioning system with no air consumption in controlled state
  • EtherNet/IP, PROFINET, Modbus TCP, PROFIBUS DP-V1, DeviceNet or Bürkert system bus (büS)

Type 1061 - Accessory for pneumatic rotary actuators


Type 1061 combines the function of a position feedback and a solenoid valve in one box. It can be used with pneumatic rotary actuators of type 2051 and 2052, which are part of the system type 8805. Type 1061 is available in different variations of limit switches (micro switches, inductive sensors) and solenoid valves (3/2 way, 5/2 way or without solenoid valve). Next to this, an ATEX version and variants with ASi fieldbus connections are also available. Because of the several available variations, it perfectly meets the requirements of different applications and processes.

  • Combines the functions of a position feedback and a solenoid valve in one
  • Available with 3/2 way, 5/2 way or without solenoid valve
  • ATEX versions available
  • Perfectly suited for pneumatic actuators: 2051 and 2052
  • Adjustable bracket allows the combination with actuators in different sizes

Type 8685 - Control- and feedback head for integrated mounting on Robolux valves Type 2036


Feedback Type 8685 and control head Type 8686 are optimized for integrated mounting on pneumatically operated actuators Type 2036 Robolux. The adjustment to the individual actuator size is done through DIP-switches. As compact units the devices contain the complete automation functionality of both individually operated actuator pistons. Depending on the configuration the electrical and visual position feedback is done by non-contact switches and high-power LEDs. Integrated pilot valves control the actuator pistons and AS-interface communication is available. Using appropriate barriers both types feature intrinsically safety acc. to ATEX. In this way a complete concept for decentralized automation is feasible. The compact body is especially destinguished by its hygienic design, materials beeing chemically resistant against cleaning media and a proven IP protection. In addition the Control Head Type 8686 features an integrated compressed air filter to protect the pilot valve function against particles through the compressed air supply.

  • Compact stainless steel design
  • Contactless valve position registration
  • Coloured illuminated status display
  • Fieldbus AS-Interface (optional)
  • Version for ATEX / IECEx

Type 8686 - Control- and feedback head for integrated mounting on Robolux valves Type 2036


Feedback Type 8685 and control head Type 8686 are optimized for integrated mounting on pneumatically operated actuators Type 2036 Robolux. The adjustment to the individual actuator size is done through DIP-switches. As compact units the devices contain the complete automation functionality of both individually operated actuator pistons. Depending on the configuration the electrical and visual position feedback is done by non-contact switches and high-power LEDs. Integrated pilot valves control the actuator pistons and AS-interface communication is available. Using appropriate barriers both types feature intrinsically safety acc. to ATEX. In this way a complete concept for decentralized automation is feasible. The compact body is especially destinguished by its hygienic design, materials beeing chemically resistant against cleaning media and a proven IP protection. In addition the Control Head Type 8686 features an integrated compressed air filter to protect the pilot valve function against particles through the compressed air supply.

  • Compact stainless steel design
  • Contactless valve position registration
  • Coloured illuminated status display
  • Fieldbus AS-Interface (optional)
  • Version for ATEX / IECEx

Adapters for hygienic process valves Type KK01


Optimised for hygienic process technology in the beverage, food and pharmaceutical industry, control heads, positioners and process controllers can be combined with all types of pneumatically actuated process valves. In terms of automation concept and field equipment selection this enables complete uniform solutions, regardless of whether they are hygienic single-seat, double seat and flap valves or armatures for auxiliary mediums such as steam, water and cleaning chemicals. This standardisation reduces stock and simplifies plant operation by reducing the diversity of devices. Through robust adapters, specifically tailored to all commercially available armatures, control heads, positioners and process controllers are integrated in a simple and reliable way.

  • Positioner / Process controller TopControl ELEMENT Type 8692, 8693, 8694 BASIC and 8696 BASIC
  • Positioner / Process controller SideControl Remote Type 8792, 8793 and 8791 BASIC
  • Control heads Type 8681 and ELEMENT Type 8690, 8691 and 8695
  • Integrated program for decentralised automation of hygienic process valves and auxiliary processes

Type 8635 - Digital electropneumatic Positioner SideControl


The SideControl Positioner Type 8635 is an electropneumatic positioner for pneumatically actuated process valves with linear or part-turn actuators. It is excuted in two conductor technology. Signal processing, control and actuation of the internal positioning system are accomplished with microprocessor controlled electronics. The software function Autotune implemented therein enables automatic adaptation of the positioner to the control valve in use. The positioner is parametrized and operated comfortably via three operating keys and a plain-text display. It is possible to set up a decentralized control system if a process controller with PID characteristics is used. As an option, the SideControl Positioner Type 8635 can be supplied with approval for use in the Ex area (Zone 1) according to ATEX. Because of its compact and robust design, the housing is suitable for use in chemical and process engineering.

  • Compact and robust design
  • Easy to start using tune function
  • Dynamic positioning system with no air consumption in controlled state
  • Intrinsically safe according to ATEX II 2 (1) G Ex ia IIC T6 Gb
  • Optionally with integrated process controller

Other


Type 8798 - Remote sensor for pneumatically actuated process valves

Type 8798 - Remote sensor for pneumatically actuated process valves


อ่านต่อ

Type 8694 - Digital electropneumatic positioner for the integrated mounting on process control valves Top Control

Type 8694 - Digital electropneumatic positioner for the integrated mounting on process control valves Top Control


อ่านต่อ

Type 8692 - Digital electropneumatic Positioner for the integrated mounting on process control valves Top Control

Type 8692 - Digital electropneumatic Positioner for the integrated mounting on process control valves Top Control


อ่านต่อ

Type 8696 - Digital electropneumatic positioner for the integrated mounting on process control valves Top control

Type 8696 - Digital electropneumatic positioner for the integrated mounting on process control valves Top control


อ่านต่อ

Type 8791 - Digital electropneumatic Positioner SideControl

Type 8791 - Digital electropneumatic Positioner SideControl


อ่านต่อ

Type 8792 - Digital electropneumatic Positioner SideControl

Type 8792 - Digital electropneumatic Positioner SideControl


อ่านต่อ

Type 8693 - Digital electropneumatic process controller for the integrated mounting on process control valves Top Control

Type 8693 - Digital electropneumatic process controller for the integrated mounting on process control valves Top Control


อ่านต่อ

Type 8793 - Digital electropneumatic Process Controller SideControl

Type 8793 - Digital electropneumatic Process Controller SideControl


อ่านต่อ

Type 1061 - Accessory for pneumatic rotary actuators

Type 1061 - Accessory for pneumatic rotary actuators


อ่านต่อ

Type 8685 - Control- and feedback head for integrated mounting on Robolux valves Type 2036

Type 8685 - Control- and feedback head for integrated mounting on Robolux valves Type 2036


อ่านต่อ

Type 8686 - Control- and feedback head for integrated mounting on Robolux valves Type 2036

Type 8686 - Control- and feedback head for integrated mounting on Robolux valves Type 2036


อ่านต่อ

Adapters for hygienic process valves Type KK01

Adapters for hygienic process valves Type KK01


อ่านต่อ

Type 8635 - Digital electropneumatic Positioner SideControl

Type 8635 - Digital electropneumatic Positioner SideControl


อ่านต่อ